Has your old geyser given up on you? Are you planning to purchase a new contemporary model but are clueless about the installation? The truth is that installing a geyser can be daunting but if you understand the basics of it, you can have a smooth sailing.

You must remember that if you aren’t careful while installing geysers then they can break down in the near future and cost you a fortune. Not only that, it will also cost you time and energy. So, why not get it right in the first go? For that, you must know what are a few common rookie mistakes that many people make while installing instant geysers or water heaters at home.

5 Common Water Heater Installation Mistakes to Avoid

1. Choosing the Wrong Size of the Geyser

One of the most common mistakes that many homeowners make while installing a geyser for their home is either choosing a geyser that is too large or too small. If the geyser is too large, it will lead to wastage of energy and shoot up your power bill.

On the other hand, if your geyser is too small, then it might not be able to meet your hot water demands. This is why it is critical to pick the right size of geyser after taking into consideration key factors like the size of your family, water usage and your budget.

2. Improper Placement of the Geyser

The last thing you want to do is place your new geyser in a place that is not meant for it. We are talking about your attic, under certain floors or near a closet. Make sure that you install your geyser in a place that is safe. You must avoid placing your geyser in high-traffic areas close to your living room or your bedroom. You must also stay clear of cramped-up places or places prone to flooding. If you are unsure of where to install your new geyser, we recommend you hire a professional geyser installation service.

3. Failure to Follow Instructions

Installing a geyser requires a lot of attention to detail. You must carefully read and understand the procedure before you start to install your new geyser. Missing a step or getting it wrong can not only be a waste of your time and energy but it will also be a costly affair.

4. Poor Ventilation

You must not neglect the ventilation aspect while installing a water heater. Inadequate ventilation can lead to the buildup of toxic fumes and gases like carbon monoxide and be hazardous for your and your family’s health. We recommend that you avoid installing your geyser in confined places like a basement that lacks ventilation or a closet.

5. Ignoring Safety Regulations

If you want to avoid catastrophic accidents like fire or explosion when it comes to your geyser, it is advisable that you adhere to the safety regulations mentioned by the manufacturer. Ensure that you install temperature controls, pressure relief valves, gas shutoff valves and other additional devices that will ensure that your geyser functions seamlessly and stands the test of time.

You can consider installing a carbon monoxide detector at your abode or simply inspect your geyser every 6 months to ensure it is functioning properly.

The Bottom Line

To conclude, water heater installation can be stress-free if you do it the right way. Make sure you buy the right size, abide by the manufacturer’s guidelines and local building codes and place them in a well-ventilated space.

Looking for a premium-quality geyser brand to invest in 2024? Look no further than AO Smith. They have an impressive range of tankless, storage, instant water heaters and water purifiers that are ergonomic and boast of cutting-edge technology.