When buying a diver watch, there are many features that are different among manufacturers, here are some of the features that you will find on a typical diver watch. It is the way entirely changed things to own a running watch so that it is also to use a part of regular training routine and lots of spots personality making the transition from casual jogger and divers. It is the watches are a favorite and among the elite athletes, weekend worries professionals and everyday consumers. If you are in the search to get the watches you like so then Visit here https://www.thewatchcompany.co.jp/.

See the case

Cases of diving watches must be resistant to water and pressure that is under water and when able to withstand the corrosion of marine water, so watch cases are usually made of stainless steel, titanium, ceramics such as. Made of material and synthetic resin or is plastic. The case must also protect against external magnetic effects and shocks.

Elapsed time controller

Analog Divergence Watch often features a rotating bezel, used to read a specific point in time. It is used to calculate the length of a dive. The bezel is used bend until you can adjust the zero to the bezel by the hand seconds or minutes. As time goes on it can be read bezel. This will avoid scuba diving, which is used on a regular watch dial and when going underwater, a large dial will be required to read. The bezel is “indirect” on a diversified clock, which means that the bezel can be turned in one direction because it can be changed incorrectly so that the length of time underwater does not increase. So the bezel can only run in such a short amount of time underwater. Digital dive watches usually perform this function using a one stop watch clock function. Digital dive watches can also offer depth gauge and logging features.

Strap / bracelet

Usually a diver’s watch includes a rubber, silicone rubber or polyurethane strap or a metal bracelet that is allowed to wear a wet or dry suit. This bracelet often has a (hidden) diver’s extension deployment clip through which the bracelet can be properly extended.

Basel markings

The latest diver watches that look at their bezels for 15 minutes or 20 minutes are the result of a copy of the Rolex bezel design from the 1940s. The divers then planned to dive for a particular maximum depth based on the US Navy’s dive tables, and devised according to the planned dive profile.

The crown

According to the general diversity, the watch must have a water resistant crown or it will be flooded. To make any adjustments in time and date, Often has to expose the crown and is then tightened to restore the watch’s water resistance. However, there are models that have crowns that are routinely operated like crowns of analog watches for divers. Eliminate the locked crowns and the traditional water resistant crown cannot be run under water.